The butt weld reducing tee forms a smaller branch from a larger pipe run within one fitting body. Its three ends are prepared for permanent welded joints to the connected pipes. The reduced outlet changes the branch size at the junction, which can simplify the layout of an auxiliary line. Carbon steel, stainless steel and related piping grades are selected according to the service specification. Run diameter, outlet diameter and wall schedule need to be stated together. The tee then becomes part of a fabricated spool or site-welded pipeline, with end preparation and alignment checked before the joints are completed.
Product Parameters
|
Item |
Details |
|
Execution standard |
ASME B16.9,GOST17376,DIN2615 |
|
Product type |
Reducing butt-weld tee |
|
Size range |
DN15-DN1200(1/2"-48") |
|
Wall thickness |
SCH10S,SCHSTD,SCH40S,SCH80S,SCHXS |
|
Connection type |
Butt weld |
|
Material options |
Carbon steel,stainless steel and related piping grades |
|
Surface treatment |
According to material and order |
|
Packaging |
Wooden crate or wooden pallet |
|
Supply capacity |
1000 tons/month |
Main Applications
The butt weld reducing tee creates smaller take-offs on liquid or gas process lines.
Equipment spools can branch to pumps, vessels and heat exchangers.
Utility manifolds can combine a branch and outlet size change at one junction.
A smaller take-off can feed an auxiliary line while the main pipeline retains its selected diameter.
Why choose us
Our butt weld reducing tee production review connects the diameter combination with end preparation and wall schedule. We separate mixed branch sizes within the order and can group them by purchasing line item for packing. This control is useful when a spool package contains several similar fittings. Buyers retain a defined size and material reference for workshop receiving and for later orders involving the same branch arrangement.
On mixed schedules, write the run and branch diameters in a consistent order; reversing those descriptions can cause confusion during receiving and spool preparation.
FAQ
Q: Is a separate reducer always needed at the branch?
A: No. The tee already provides a smaller outlet within its body.
Q: Can the welded joint be unscrewed?
A: No. Butt-weld ends form a permanent connection.
Q: Can mixed run and branch sizes be ordered?
A: Yes. Specify both pipe sizes and the required wall schedule.
Hot Tags: butt weld reducing tee, China butt weld reducing tee manufacturers, suppliers, factory
